Title Page
-
Services trade test including cutout change assesment
-
ENWL training academy
-
Conducted on
-
John lee
-
Personnel
Jointing
-
SNE cut-out
Joint 1
-
Service breech joint 35mm CNE off 4c 120 Pilc
-
Correct PPE worn throughout?
-
Correct procedures followed?
-
Through cable tested correctly?
-
Overall strip correct?
-
Testing across live connections done correctly
-
Does the joint fit in the shell
Joint 2
-
Single phase service breech joint off Consac
-
Correct PPE worn throughout?
-
Correct procedures followed?
-
Through cable tested correctly?
-
Overall strip correct?
-
Testing across live connections done correctly
-
Does the joint fit in the shell
Joint 3
-
Single phase 35 sac SCNE live cut and straight joint
-
Correct PPE worn throughout?
-
Correct procedures followed?
-
Overall strip correct?
-
Does the joint fit in the shell
Joint 4
-
2c 35mm PILC live cut and straight joint to 35 SAC SNE
-
Correct PPE worn throughout?
-
Correct procedures followed?
-
Through cable tested correctly?
-
Overall strip correct?
-
Testing across live connections done correctly
-
Does the joint fit in the shell
Joint 5
-
Open SNE service for a breech joint
-
Correct PPE worn throughout?
-
Correct procedures followed?
-
Through cable tested correctly?
-
Overall strip correct?
2c PILC COMPOUND FILLED live cut-out change (plastic cut-out only) x2
-
1st cutout change overall result
-
2nd cutout change overall result
-
Correct PPE worn throughout?
-
Polarity test done before cutout changed
-
ELI test done before cutout change
-
Old cutout removed safely
-
Cutout kit fitted as per the correct module
-
Plum removed safely
-
Earth fitted as per correct module
-
New cutout fitted correctly, series 5 or 6
-
Polarity test done correctly
-
ELI test done correctly
Service position tests
Polarity and ELI testing
-
CNE cut-out correct polarity found?
-
CNE cut-out no neutral found?
-
CNE cut-out cross polarity found?
-
CNE cut-out dead found?
-
SNE cut-out correct polarity found?
-
SNE cut-out cross polarity found?
-
SNE cut-out No neutral found?
-
SNE cut-out DEAD found?
-
Correct ELI reading for CNE cut-out identified (max reading 0.35 Ohms)?
-
Correct ELI reading for SNE cut-out identified (max reading 0.80 Ohms)?
Insulation resistance and continuity
Insulation resistance and continuity testing on 3c 25mm CNE
-
Did they find short between 2 phases?
-
Did they find the cable healthy?
-
Did they find broken phase?
Insulation resistance and continuity testing 3 x single phase 35mm CNE cables
-
Were the 2 healthy cables found?
-
Was the cable with the dead short found?
Fault finding on 4c waveform
Testing on 4c mains cable
-
Phase down found?
-
Healthy cable found?
-
No neutral found?
-
No earth found?
-
Phase and neutral cross found?
-
Cable dead found?
-
Phase to phase (weld) found?
Signatures
Course review
-
Assessor name
-
Assessor name
-
Assessor name