Taping Quality Control

Confirm trims are plumb and in plane with the wall prior to taping

Confirm cornerbeads and 093 control joints are floated at the ceiling and floor lines to minimize gaps to the T-bar and base

Confirm wall is finished to floor

Confirm inside corners are hand sanded

Confirm there are no pin holes in the mud prior to primer aplication

Check around the door and window jambs to make certain there are no chatter marks on the walls, and frames are clean of excess mud

Confirm walls and frames in room sand corridors are clean of excess mud from skimcoat

Confirm electrical boxes, etc. are clean of taping mud

Confirm floors are scraped and broom swept before primer

Confirm minimum temperature of 50 degrees fahrenheit maintained int he buildilng

Confirm adequate ventilation