WUC - Balcony Construction (Checklist)

19 mm Compressed cement sheet flooring

100 mm Structural step down in Balcony to house/ Please contact technical support team, if step down is less than 100 mm, please contact TS team

Flooring has been nailing to balcony joists using 2.8 x 50mm FC nails 3 50mm D Head gun nails

Flooring Sheet Control Joints at every 2.7 m interval (Every 3 Sheets)

Marked the Balcony floor waste in by Site supervisor (Any location is within 2 m from balcony floor waste and floor waste to sliding door maximum distance 1.5 m

200 mm wide Balcony overflow installed 70 mm above the Structural floor level.

Balcony edge flashing install with 150 mm with upstand

Flashing in under the sliding door/other door area with 25 mm upstand in three side

Waterproof has been done under the sliding door area (Flashing is only a substrate)

Timber blocking has been provided under the Balcony balustrade post location under the flooring.

Any parapet wall with balustrade on top, please provide minimum 3 Nos/90X45 top plate with sufficient connection to main frame

Screed top level next to sliding doors are 65 mm less than the house (Liveable area) structural floor level (10 mm thick tile)

Final tile finish 50 mm less than the house (Liveable area) structural floor level at sliding door area

WU approved Water proofing Product has bene used