Title Page
-
Store Number
-
Store Name
-
Conducted on
-
Prepared by
Leak Test
-
Carry out leak test on all accessible pipework and equipment for all packs, condensing units and integrals.
Packs
-
Are there any Packs onsite
-
Check all compressor running to operational temperatures and pressures
-
Check oil system are functioning correctly
-
Test low level switches are operational
-
Position level sensors and mark level indicators if possible
Inverters
-
Are there any inverters onsite
-
Check all inverters are operational and free from faults (Including fans working and heat sinks clean)
Condensers/Gas Coolers
-
Are there any pack condensers or gas coolers on site
-
Is the sufficient air flow around the condenser/ gaas cooler
-
Please provide photo of restrictions and inform Managing Engineer
-
Is this a CO2 Store
-
Is this the latest Kelvion Gas Cooler with ceramic coating on the fins
-
Make sure relevant SOP is followed to clean this gas cooler if in doubt contact Managing Engineer
-
Is the Gas Cooler clean
-
Please provide picture of clean Gas Cooler
-
Check air flow with anemometer and record
-
Clean Gas Coolers
-
Please provide reasons why not and inform your Managing Engineer
-
please provide picture of clean Gas Cooler
-
Check air flow anemometer and record
-
Has the Gas Cooler Audit been completed? If unsure contact Managing Engineer
-
Are Condensers Clean
-
Please provide photos of clean condensers
-
Check air flow across coil with Anemometer and record
-
Clean condensers
-
Please provide reason why these have not been cleaned
-
Check air flow across coil with Anemometer
-
Please provide photos of condensers before and after being cleaned
-
Are Air Intake Louvres are clean and operational
-
Check fans are operational and rotation is correct (including Belts and bearings)
-
Check condenser back up is operational
Cold rooms
-
Are there Cold rooms onsite
-
Are all cold room evaporators clean
-
Please arrange for these to be cleaned ASAP. And provide photos before and after
-
Check all cold store doors are operating correctly
-
Are there any door switches fitted
-
is the door switch working correctly
-
Please repair or arrange replacement
-
Check all fans are working and rotation is correct
Shop floor/ food prep areas
-
Check all frozen trim heaters are operational
-
Check All night blinds are operational
-
Are there any signs of water leaks on shop floor
-
Are there condensate pump trays onsite
-
Please clean pump tray and confirm pump is working
-
Are there any shopfloor integral cabinets onsite
-
Check all integral condensers are clean
-
Please provide photos of clean condensers
-
Clean Integral condensers
-
Please provide reason why these have not been cleaned
-
Please provide photos of condensers before and after being cleaned
-
Are all Condenser fans working and the correct type for this cabinet
Back Of House Integral Cabinets
-
Are there Williams integrals onsite
-
Do all Doors close correctly
-
Check all Williams condensers are clean
-
Please provide photos of clean condensers
-
Clean Williams condensers
-
Please provide reason why these have not been cleaned
-
Please provide photos of condensers before and after being cleaned
Air conditioning
-
Is there Air conditioning onsite
-
Are all filters clean
-
Clean Filters
-
Please provide reasons why not and inform Managing Engineer
-
Is there any ventilation blowing directly into cabinets?
-
Please rectify this if unable please list why and inform Managing engineer
Networking
-
Check that all fixtures are online.
Predictives
-
Are there any outstanding Predictive work orders for this store
-
Please complete all Predictive work orders If unable please provide reasons why.
Additional works needed
-
If Any further Fabric Works are required please add work order or works request number
-
Any further works or parts needed
-
Please contact service solution desk if any further works are required, or if work orders need to be raised.
-
Email this form to your Managing Engineer and the TA Team
-
Add signature
