Arcus 2019 Fit for Summer Convenience Store Red

• Store Number

• Store Name

• Conducted on

  Date

• Prepared by

Leak Test

• Carry out leak test on all accessible pipework and equipment for all packs, condensing units and integrals.

  Yes

  No

Packs

• Are there any Packs onsite

  Yes

  No

• Check all Compressors stages are loading and unloading correctly

  Pass

  Fail

  N/A

• Check all compressor running to operational temperatures and pressures

  Pass

  Fail

• Check oil system are functioning correctly

  Yes

  No

• Check all oil switches are operating correctly

  Pass

  Fail

  N/A

• Check Transducer calibration

  Pass

  Fail

  N/A

• Test low level switches are operational

  Pass

  Fail

• Position level sensors and mark level indicators if possible

Inverters

• Are there any inverters onsite

  Yes

  No

• Check all inverters are operational and free from faults

  Yes

  No

• Check all cooling fans are working

  Yes

  No

  N/A

• Check all heat sink and fans are clean and free from restrictions

  Yes

  No

  N/A

Condensers/Gas Coolers

• Are there any pack condensers or gas coolers on site

  Yes

  No

• Is there sufficient air flow around the condenser/ gas cooler

  Yes

  No

  N/A

• Please provide photo of restrictions and inform Managing Engineer

  Media

• Is this a CO2 Store

  Yes

  No

• Is this the latest Kelvion Gas Cooler with ceramic coating on the fins

  Yes

  No

• Make sure relevant SOP is followed to clean this gas cooler if in doubt contact Managing Engineer

• Is the Gas Cooler clean

  Yes

  No

• Please provide picture of clean Gas Cooler

  Media

• Check air flow with anemometer and record

• Clean Gas Coolers

  Completed

  Not Completed

• Please provide reasons why not and inform your Managing Engineer

• please provide picture of clean Gas Cooler

  Media

• Check air flow anemometer and record

• Has the Gas Cooler Audit been completed? If unsure contact Managing Engineer

  Yes

  No

• Are Condensers Clean

  Yes

  No

• Please provide photos of clean condensers

  Media

• Check air flow across coil with Anemometer and record

• Clean condensers

  Completed

  Not Completed

• Please provide reason why these have not been cleaned

• Check air flow across coil with Anemometer

• Please provide photos of condensers before and after being cleaned

  Media

• Are Air Intake Louvres are clean and operational

  Yes

  No

  N/A

• Check Plenum chamber is operational and vents are weighted correctly

  Yes

  No

  N/A

• Check fans are operational and rotation is correct (including Belts and bearings)

  Pass

  Fail

• Check condenser back up is operational

  Yes

  No

  N/A

Cold rooms

• Are there Cold rooms onsite

  Yes

  No

• Are all cold room evaporators clean

  Yes

  No

• Please arrange for these to be cleaned ASAP. And provide photos before and after

• Check all cold store doors are operating correctly

  Yes

  No

• Check all internal door flaps are working correctly and free from damage

  Pass

  Fail

  N/A

• Are there any door switches fitted

  Yes

  No

• is the door switch working correctly

  Yes

  No

• Please repair or arrange replacement

• Check trim heaters are working

  Yes

  No

  N/A

• Check drains are clear and running free

  Yes

  No

• Any damage to drains please list, Drain heaters working, lagging missing etc.

• Check all fans are working and rotation is correct

  Yes

  No

• Check all probes are in the correct location and reading correctly

  Yes

  No

  N/A

Shop floor/ food prep areas

• Is Airflow acceptable on all cabinets

  Yes

  No

• Check for ice build up. check all fans are working and are correct for this cabinet

• Check all frozen trim heaters are operational

  Pass

  Fail

• Check All night blinds are operational

  Pass

  Fail

• Are there any signs of water leaks on shop floor

  Yes

  No

• Are there condensate pump trays onsite

  Yes

  No

• Please clean pump tray and confirm pump is working

• Remove 1 x Random Honeycomb and ambient air curtain check if clean

  Clean

  Dirty

• Please provide photos and check with Manager on cabinet cleaning details

  Media

• Please provide photos

  Media

• Are there any shopfloor integral cabinets onsite

  Yes

  No

• Check all integral condensers are clean

  Clean

  Dirty

• Please provide photos of clean condensers

  Media

• Clean Integral condensers

  Completed

  Not Completed

• Please provide reason why these have not been cleaned

• Please provide photos of condensers before and after being cleaned

  Media

• Are all Condenser fans working and the correct type for this cabinet

  Yes

  No

Back Of House Integral Cabinets

• Are there Williams integrals onsite

  Yes

  No

• Do all Doors close correctly

  Yes

  No

  N/A

• Check all Williams condensers are clean

  Clean

  Dirty

• Please provide photos of clean condensers

  Media

• Clean Williams condensers

  Completed

  Not Completed

• Please provide reason why these have not been cleaned

• Please provide photos of condensers before and after being cleaned

  Media

Air conditioning

• Is there Air conditioning onsite

  Yes

  No

• Are all filters clean

  Yes

  No

• Clean Filters

  Yes

  No

• Please provide reasons why not and inform Managing Engineer

• Is there any ventilation blowing directly into cabinets?

  Yes

  No

• Please rectify this if unable please list why and inform Managing engineer

Networking

• Check that all fixtures are online.

  Pass

  Fail

Predictives

• Are there any outstanding Predictive work orders for this store

  Yes

  No

• Please complete all Predictive work orders If unable please provide reasons why.

Additional works needed

• Any further works or parts needed

  Work order needs to be raised to investigate

  No additional works required

  Work order needed to order parts

  Parts all ready on order

• If Any further Fabric Works are required please add work order or works request number

• Please contact service solution desk if any further works are required, or if work orders need to be raised.

• Email this form to your Managing Engineer and the TA Team

• Add signature

  Sign