Title Page

  • Store Number

  • Store Name

  • Conducted on

  • Prepared by

Packs

  • Check all compressor running to operational temperatures and pressures

  • Check all Compressors stages are loading and unloading correctly

  • Check all oil switches are operating correctly

  • Check oil system are functioning correctly

  • Check Transducer calibration

  • Test low level switches are operational

  • Position level sensors and mark level indicators if possible

Inverters

  • Check all inverters are operational and free from faults

  • Check all cooling fans are working

  • Check all heat sink and fans are clean and free from restrictions

Condensers/Gas Coolers

  • Are Condensers Clean

  • Please provide photos of clean condensers

  • Check air flow across coil with Anemometer

  • Clean condensers

  • Please provide reason why these have not been cleaned

  • Check air flow across coil with Anemometer

  • Please provide photos of condensers before and after being cleaned

  • Are Air Intake Louvres are clean and operational

  • Check Plenum cahmber is operational and vents are weighted correctly

  • Check fans are operational and rotation is correct (including Belts and bearings)

  • Check condenser back up is operational

Cold rooms

  • Are all cold room evaporators clean

  • Please arrange for these to be cleaned ASAP. And provide photos before and after

  • Check all cold store doors are operating correctly

  • Check all internal door flaps are working correctly and free from damage

  • Check trim heaters are working

  • Check drains are clear and running free

  • Any damage to drains please list, Drain heaters working, lagging missing etc.

  • Check all fans are working and rotation is correct

  • Check all probes are in the correct location.

  • Check all probes are reading

Shop floor/ food prep areas

  • Check all frozen trim heaters are operational

  • Check All night blinds are operational

  • Are there any signs of water leaks on shop floor

  • Are there condensate pump trays onsite

  • Please clean pump tray and confirm pump is working

  • Remove 1 x Random Honeycomb and ambient air curtain check if clean

  • Please provide photos and check with Manager on cabinet cleaning details

  • Please provide photos

  • Are there any shopfloor integral cabinets onsite

  • Check all integral condensers are clean

  • Please provide photos of clean condensers

  • Clean Integral condensers

  • Please provide reason why these have not been cleaned

  • Please provide photos of condensers before and after being cleaned

  • Are there Williams integrals onsite

  • Do all Doors close correctly

  • Check all Williams condensers are clean

  • Please provide photos of clean condensers

  • Clean Williams condensers

  • Please provide reason why these have not been cleaned

  • Please provide photos of condensers before and after being cleaned

Networking

  • Check that all fixtures are online.

Predictives

  • Are there any outstanding Predictive work orders for this store

  • Please complete all Predictive work orders If unable please provide reasons why.

Additional works needed

  • Any further works or parts needed

  • Please contact service solution desk if any further works are required, or if work orders need to be raised.

  • Email this form to your Managing Engineer and the TA Team

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.