Title Page

  • Store Number

  • Store Name

  • Conducted on

  • Prepared by

Packs

  • Check all compressor running to operational temperatures and pressures

  • Check oil system are functioning correctly

  • Test low level switches are operational

  • Position level sensors and mark level indicators if possible

Inverters

  • Check all inverters are operational and free from faults (Including fans working and heat sinks clean)

Condensers/Gas Coolers

  • Are Condensers Clean

  • Please provide photos of clean condensers

  • Check air flow across coil with Anemometer

  • Clean condensers

  • Please provide reason why these have not been cleaned

  • Check air flow across coil with Anemometer

  • Please provide photos of condensers before and after being cleaned

  • Are Air Intake Louvres are clean and operational

  • Check Plenum chamber is operational and vents are weighted correctly

  • Check fans are operational and rotation is correct (including Belts and bearings)

  • Check condenser back up is operational

Cold rooms

  • Are all cold room evaporators clean

  • Please arrange for these to be cleaned ASAP. And provide photos before and after

  • Check all cold store doors are operating correctly

  • Check all fans are working and rotation is correct

Shop floor/ food prep areas

  • Check all frozen trim heaters are operational

  • Check All night blinds are operational

  • Are there any signs of water leaks on shop floor

  • Are there condensate pump trays onsite

  • Please clean pump tray and confirm pump is working

  • Are there any shopfloor integral cabinets onsite

  • Check all integral condensers are clean

  • Please provide photos of clean condensers

  • Clean Integral condensers

  • Please provide reason why these have not been cleaned

  • Please provide photos of condensers before and after being cleaned

  • Are there Williams integrals onsite

  • Do all Doors close correctly

  • Check all Williams condensers are clean

  • Please provide photos of clean condensers

  • Clean Williams condensers

  • Please provide reason why these have not been cleaned

  • Please provide photos of condensers before and after being cleaned

Networking

  • Check that all fixtures are online.

Predictives

  • Are there any outstanding Predictive work orders for this store

  • Please complete all Predictive work orders If unable please provide reasons why.

Additional works needed

  • Any further works or parts needed

  • Please contact service solution desk if any further works are required, or if work orders need to be raised.

  • Email this form to your Managing Engineer and the TA Team

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.