ASL Fit for Summer 2018 Mid Focus Main Store

• Store Number

• Store Name

• Conducted on

  Date

• Prepared by

Packs

• Check all compressor running to operational temperatures and pressures

  Pass

  Fail

• Check oil system are functioning correctly

  Yes

  No

• Check Transducer calibration

  Pass

  Fail

• Test low level switches are operational

  Pass

  Fail

• Position level sensors and mark level indicators if possible

Inverters

• Check all inverters are operational and free from faults (including fans working and heat sinks clean).

  Yes

  No

Condensers/Gas Coolers

• Are Condensers Clean

  Yes

  No

• Please provide photos of clean condensers

  Media

• Check air flow across coil with Anemometer

• Clean condensers

  Completed

  Not Completed

• Please provide reason why these have not been cleaned

• Check air flow across coil with Anemometer

• Please provide photos of condensers before and after being cleaned

  Media

• Are Air Intake Louvres are clean and operational

  Pass

  Fail

  N/A

• Check Plenum cahmber is operational and vents are weighted correctly

  Pass

  Fail

  N/A

• Check fans are operational and rotation is correct (including Belts and bearings)

  Pass

  Fail

• Check condenser back up is operational

  Yes

  No

  No Back up Fitted

Cold rooms

• Are all cold room evaporators clean

  Yes

  No

• Please arrange for these to be cleaned ASAP. And provide photos before and after

• Check all cold store doors are operating correctly

  Yes

  No

• Check all internal door flaps are working correctly and free from damage

  Yes

  No

• Check trim heaters are working

  Yes

  No

• Check all fans are working and rotation is correct

  Yes

  No

• Check all probes are in the correct location.

  Yes

  No

Shop floor/ food prep areas

• Check all frozen trim heaters are operational

  Pass

  Fail

• Check All night blinds are operational

  Pass

  Fail

• Are there any signs of water leaks on shop floor

  Yes

  No

• Are there condensate pump trays onsite

  Yes

  No

• Please clean pump tray and confirm pump is working

• Remove 1 x Random Honeycomb and ambient air curtain check if clean

  Clean

  Dirty

• Please provide photos and check with Manager on cabinet cleaning details

  Media

• Please provide photos

  Media

• Are there any shopfloor integral cabinets onsite

  Yes

  No

• Check all integral condensers are clean

  Clean

  Dirty

• Please provide photos of clean condensers

  Media

• Clean Integral condensers

  Completed

  Not Completed

• Please provide reason why these have not been cleaned

• Please provide photos of condensers before and after being cleaned

  Media

• Are there Williams integrals onsite

  Yes

  No

• Do all Doors close correctly

  Yes

  No

  N/A

• Check all Williams condensers are clean

  Clean

  Dirty

• Please provide photos of clean condensers

  Media

• Clean Williams condensers

  Completed

  Not Completed

• Please provide reason why these have not been cleaned

• Please provide photos of condensers before and after being cleaned

  Media

Networking

• Check that all fixtures are online.

  Pass

  Fail

Predictives

• Are there any outstanding Predictive work orders for this store

  Yes

  No

• Please complete all Predictive work orders If unable please provide reasons why.

Additional works needed

• Any further works or parts needed

  Work order needs to be raised to investigate

  No additional works required

  Work order needed to order parts

  Parts all ready on order

• Please contact service solution desk if any further works are required, or if work orders need to be raised.

• Email this form to your Managing Engineer and the TA Team