Sinks, hand basins and their surrounds, including splash backs, ledges, inner and outer surfaces of bowls, overflows, plugs, drain holes, taps, supports, pipes, traps etc, to be dry and free of all soilage, hairs, smears, debris etc, after cleaning. Taps to be polished. No build up of soilage or staining materials to be permitted.
Urinals and bowls to be free of scale, debris or other obstructions after cleaning. The inner surfaces of bowls and stalls to be thoroughly scrubbed during cleaning. All associated pipe work and cisterns to be free of smears, streaks and stains after cleaning. No build up of soluble or staining materials on stalls, bowls, pipes, cisterns, and related surfaces to be permitted.
All interior surfaces including rims and other hidden areas of WC bowls to be thoroughly scrubbed during cleaning, the exterior of bowls, seats, seat hinges and associated pipe work and cisterns to be thoroughly cleaned so as to be free of all marks, streaks and stains. No build up of soilage to staining materials to be permitted. Particular attention to be paid to areas less accessible such as flushing rims, pipe connections, and seat pillars and hinges.
The exterior of toilet paper holders, towel cabinets and any other fixtures and fittings which may occur to be free of all streaks, smears, stains and other soilage after cleaning.
All mirrors to be cleaned so as to be free of smears, stains and marks.
All chrome, copper, brass and other metal finishes to be maintained so as to be free of all tarnish, stains, verdigris and similar materials.
In addition to the daily cleaning as specified above all toilets will be serviced once during the course of the working day, the service will consist of wiping down surface, sinks and toilet seats and cleaning floors to remove any spills or waste material. Also the supply of soap, towels and any other consumables will be checked and replaced as necessary.
NOTE: In the context of this schedule, hard floors include terrazzo, linoleum, PVC and thermoplastic, marble, lime stone tile etc. All hard floors are to be maintained in accordance with manufacturers instructions.
Swept or mop swept floors to be free of all dust and litter. No build up of dust and soilage at edges, under furniture or in corners to be permitted.
Damp or wet mopped floors to be free of all scuffmarks and soilage adhering to floor.
Biannual - Buffed or spray cleaned floors to have an even sheen, free of scuffs and to be of good general appearance.
Biannual - Powdered polish or polish which has deteriorated such that an acceptable standard of appearance can no longer be maintained to be stripped or scrubbed, as necessary, and one or two coats of polish applied as appropriate. Polish to be removed using an approved stripping agent.
Wells after cleaning to be free if all accumulation of litter, debris and soilage in general. Tiled frontages to be wet mopped.
Stairs and intermediate landing to be maintained so as to be free of dust, debris, tarter ears, smears, fluff and any other soilage. Particular attention to be given to edges, corners, strings and risers to ensure no accumulation or build up of soilage occurs.
Banister rails and balustrades, including side panels, to be free of dust after dusting.
Spot cleaning and damp wiping to remove all stains, marks, streaks, finger marks or other soilage.
Runners to be kept free of accumulation of grit, debris and other materials interfering with the operation of the lift doors.
Control panels and surfaces to be cleaned and polished so as to be free of finger marks, smears, streaks and any other soilage.
All surfaces to be free of dust and smears after dusting.
All finger marks, smears, stain and general soilage to be removed during cleaning by spot cleaning, damp wiping or washing as appropriate, to leave surfaces clean, dry and smear free.
No smears, streaks or build up of soilage, particularly on the skirting and door kick plates to be permitted.
Walls to be free of dust and smears after dusting.
Brightwork and door furniture to be maintained so as to be tarnish free. Metal polish to be washed from bright work before dry and buffing
Lined bins to be emptied and have liners replaced as necessary. Accumulations of soilage at edges or on interior sides to be completely removed. All bins to be thoroughly wiped when necessary.
To be free of dust, smears, streaks and stains after cleaning.
Dust to be suction cleaned from voids between secondary glazing and windows.
To be free of dust, marks, smears, streaks and stains after cleaning.
After cleaning, both the inside and outside of external windows windowpanes to be free of all marks, streaks and smears.
All streaks and runs to be removed from surrounds as they occur
Cladding to be free of dirt & grime
After cleaning, both sides of entrance and reception area glass to be free of all marks, streaks and smears.
All streaks and runs to be removed from surrounds as they occur.
The area in front and to the sides of all entrances will be maintained free from debris, litter, spills etc.
All areas will be maintained free from debris, litter, etc.
Corridor lighting to be kept clear of dust and grime (dry wiped)
Periodic cleans are defined as those specific tasks that will be time defined in their completion. That time definition will be weekly, bi-weekly, calendar monthly, bi-monthly, quarterly, six monthly and annually.