JCD-QMS-QAC-016 Installation of Ancon Restraint System and 110mm Rockwool insulation

• Conducted on

  Date

• Prepared by

• Project Name

• Manager

  Sign

• Client

• Date

  Date

• Area Inspected

Installation

• 1. Correct fixings used 5.5x150/175mm - install to SFS

  Yes

  No

  N/A

• 2. Correct fixing used CSF 180mm - install to Concrete

  Yes

  No

  N/A

• 3. Fixing the Ancon Channel thorough small holes (5,3mm) into Steel or Timber

  Yes

  No

  N/A

• 4. Fixing the Ancon Channel thorough large holes (9.5mm) using CFS Screws into Concrete

  Yes

  No

  N/A

• 5. CFS Fixings used in combination with Ancon Compression Sleeves – same length as the insulation

  Yes

  No

  N/A

• 6. Concrete fixing – minimum embedment 50mm, min. hole depth 60mm<br>A small impact driver to be used - 150Nm torque

  Yes

  No

  N/A

• 7. Vertical screw spacing 225mm

  Yes

  No

  N/A

• 12. Work area left clean and tidy

  Yes

  No

  N/A

• Insulation installed with the patterned side facing outwards

  Yes

  No

  N/A

• Insulation staggered in accordance with good fixing practice

  Yes

  No

  N/A

• Joints closely butted to optimise the insulation performance

  Yes

  No

  N/A

• Insulation tightly fitted around wall brackets where these occur

  Yes

  No

  N/A

• Insulation fixed using the manufacturer typical fixing pattern and 1no stainless steel fixing with washer fixed on the centre of each insulation slab

  Yes

  No

  N/A

Sign Off

• JC Drylining Ltd Signature

  Sign

• Main Contractor Signature

  Sign

COMMENTS

• JC Drylining Ltd comments

  Yes

  No

  N/A

• Main Contractor returned comments

  Yes

  No

  N/A