Title Page

  • Date

  • Customer

  • Job Number

  • Unit Type / Equipment Model

  • Serial Number

  • Hrs

  • Before Photo

LIGHTING TOWER - FINAL INSPECTION

Inspection Items

  • Complete General Final Inspection Form

  • Replace Fuel Filter

  • Replace Air Filter, Inner and Outer

  • Replace Crimps on: Oil Switch

  • Replace Crimps on: Temp Switch

  • Replace Crimps on: Starter Motor Terminal

  • Check Oil Level

  • Check Hydraulic Oil Level

  • Check and Clean Oil Filter Housing and Lines

  • Inspect and Clean Pre-Cleaner

  • Clean out Murphy Gauge - Replace Lines if Applicable

  • Inspect Fuel Tank - Drain and clean if necessary

  • Seal Lge Plug on tank

  • Check Screw Tension on Alternator Lid

  • Inspect Exhaust Clamps

  • Inspect and Tighten Exhaust Flange Bolts

  • Secure all wiring with ties and/or P=Clamps - Check for rubbing

  • If wheel chocks are fitted, is the cable attached

  • Check trailer wiring secure under chassis

  • Check brake lines are not caught on leaf springs

  • Check limit switches

  • Run for 2 hours and adjust engine if hunting

  • Bleed cooling system

  • Check LED light harness is not damaged

  • Check earth straps

  • Check fuel banjo's are not leaking

undefined

COMPLETION

  • Notes

  • Mechanic Name

  • Mechanic Signature

  • Completion Photo

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.