Title Page
-
Site conducted
-
Build Number:
-
Customer Name:
-
Conducted on
-
Date of completion
-
Tester
Vehicle Details
-
Job Number:
-
Build Number:
-
VIN number:
-
Stage 1 Manufacturer/ model:
-
Stage 1 Type Approval number:
-
Stage 2 Type Approval (Priden):
-
Please provide the Stage 2 Type Approval number:
-
Please provide photographic evidence:
-
IVA
-
No Type Approval or IVA
-
Build start date:
Pre- Paint Test
-
For ALL fails- please select the relevant options, then provide notes and photographic evidence
Oil test
-
Check blower Oil
-
Next step:
-
Please provide details:
-
Please provide details:
-
Add media
-
Check Gearbox Oil (RIGID ONLY)
-
Next step:
-
Please provide details:
-
Please provide details:
-
Add media
-
Check Hydraulic Oil
-
Next step:
-
Please provide details:
-
Please provide details:
-
Add media
Vehicle History (oil & Tanks)
-
Hydraulic Oil used:
-
Oil Tank Size (TRAILER ONLY)
-
Oil Tank Offside/nearside (TRAILER ONLY)
-
Please provide information:
-
Diesel Tank Size (TRAILER ONLY)
-
Diesel Tank offside/ Nearside (TRAILER ONLY)
-
Please provide information:
Gear box test
-
Reduction Gearbox level
-
Next step:
-
Please provide photographic evidence
-
Reduction Gearbox Oil level
-
Next step:
-
Add media
-
Reduction Gearbox Bolts/ grub screws Tight?
-
Next step:
-
Add media
Vehicle History (Gear box)
-
What reduction Gearbox has been used?
-
Please provide details of Gearbox used:
Donkey Engine/ Cooler pack/ PTO test
-
Check Engine Oil on Donkey Engine
-
Next step:
-
Add media
-
Check Cooler pack Oil (TRACTOR UNIT ONLY)
-
Next step:
-
Add media
-
PTO Pump In & Out
-
Next step:
-
Add media
-
PTO Blower In & Out
-
Next step:
-
Add media
Vehicle History (Rev counter/ PTO/ Blower)
-
Is there a Rev Counter?
-
Where is the Rev Counter located?
-
PTO Type (RIGID/ TRACTOR UNITS ONLY)
-
PTO Type Serial Number:
-
PTO Pump Type (RIGID / TRACTOR UNITS ONLY)
-
PTO Pump Type Serial Number:
-
Blower Type
- Wade 142
- Wade 170
- Holmes 610
- Holmes 613
- Trans Air Vac TR130
- Other
-
Blower model number:
-
Blower Serial Number
-
Add media
-
Blower:
-
Please provide information:
-
Blower fitted:
-
Please provide information:
-
Location of Blower Inlet:
-
Please provide information:
-
Location of Filter:
-
Please provide information:
-
2 Way Blow
-
Please provide photo:
-
Please provide the serial number:
-
Please provide a photo:
-
Please provide a serial number:
-
Please provide information:
-
Engine Type:
-
Please provide information:
-
Please provide a serial number:
-
Please provide a photo:
-
Please provide a serial number:
-
Please provide a photo:
-
Fly wheel coupling type:
-
Fly wheel coupling bolt/ fitment:
Hydraulic Slide test
-
Hydraulic Slide Working
-
Next step:
-
Add media
Vehicle History (Hydraulic slide & selector valves)
-
Hyd. Slide location:
-
Please provide information:
-
-
Please provide information:
-
Selector Valves/ Type & Make
-
Please provide information:
Rotary valve test
-
Rotary Valve forward
-
Next step:
-
Add media
-
Rotary valve reverse
-
Next step:
-
Add media
Vehicle History (Rotary valve)
-
Rotary Valve Type:
-
Please give description:
Auger & Tipping Gear test
-
Does the Auger turn and not fail?
-
Next step:
-
Add media
-
Auger bolts tight
-
Next step:
-
Add media
-
Tipping Gear Raise
-
Next step:
-
Add media
-
Tipping Gear Lower & adjusted- (RIGIDS ONLY)
-
Next step:
-
Add media
Vehicle History (Orbit Motors/ Tipping Gear)
-
Auger Motor Type
-
Feeder Type:
-
Tipping Gear Type
-
Please provide information
-
Tipping Gear Model Number:
-
Tipping Gear Serial number:
-
Please provide photographic evidence:
-
Tipping Gear Control:
-
Select type of control:
-
Please provide photo:
-
Please provide photo:
-
Please provide photo:
-
-
Please provide photo:
-
Please provide photo:
Valves Test
-
No Hydraulic Leaks
-
Next step:
-
Add media
-
Vent Pipe Clear
-
Next step:
-
Add media
-
Are the loading valves operational and working in the correct order?- (SUCKER BLOWER ONLY)
-
Next step:
-
Add media
-
Air pressure release valve blowing
-
Next step:
-
Add media
Vehicle History (Pressure release valve & back door cut off)
-
Pressure Release Valve Type:
-
Power:
-
Power
-
Please provide information:
-
Back door cut off type:
- Electric Magnet type with reset
- D.H Pneumatic
- Other
-
Please provide photo:
-
Please provide photo:
-
Please provide information:
-
Please provide photo:
Electric Components test
-
Vacuum valve lifting- (SUCKER BLOWER ONLY)
-
Next step:
-
Add media
-
Air gauge reading ok
-
Next step:
-
Add media
-
vacuum gauge reading ok- (SUCKER BLOWER ONLY)
-
Next step:
-
Add media
-
Rev counter reading ok- (RIGID/HYDRAULIC DRIVE ONLY)
-
Next step:
-
Add media
-
All lights working (pay close attention to specification)
-
Next step:
-
Add media
-
Please provide a photograph of specification sheets:
Vehicle History (Working Lights)
-
Working Lights Used:
-
Please provide photographic evidence of the working lights used:
-
What type of switch has been used for the working lights?
-
Please provide photographic evidence of what switch has been used:
Partitions/ Hoses/ Couplings test
-
Partitions lock/ unlock
-
Next step:
-
Add media
-
Check all sheet ratchet straps WHEN BODY IS DOWN:
-
Hoses correct size/number
-
Next step:
-
Add media
-
Discharge couplings correct size/ number
-
Next step:
-
Add media
-
Check anti-luce fasteners
-
Next step:
-
Add media
-
Jumper hose
-
Next step:
-
Add media
Vehicle History (Hoses/ Couplings/ Pipe)
-
Jumper hose type/ make:
-
Air Hose Used:
-
Delivery Hose Used:
-
Couplings Used:
-
4" extension pipe length:
-
5" to 4" Extension Pipe Length:
-
5" Extension Pipe Length:
-
What type of link pipe couplings have been used?
Accessories test
-
Is the ladder in place?
-
Next step:
-
Please provide photographic evidence:
-
Please provide a photo:
-
Is the Shovel in place?
-
Next step:
-
Please provide photographic evidence:
-
Please provide a photo:
-
Is the Brush in place
-
Please provide photo:
-
Next step:
-
Please provide photographic evidence:
Propshaft test
-
Propshaft (RIGID ONLY)
-
Is the propshaft in line? - (RIGID ONLY)
-
Next step:
-
Please provide photographic evidence:
-
Please provide photo:
Vehicle History (Propshaft) RIGID ONLY
-
PTO Pump Type Serial Number:
-
Photo of serial number:
-
Couplings used with Propshaft:
-
Width of Propshaft:
-
Working Length:
Grain sock test
-
Grain sock
-
Next step:
-
Add media
Sheet test
-
Rollover handles & p/back straps
-
Next step:
-
Add media
Vehicle History (sheet/ Load cells)
-
Rollover sheet type:
-
Has a remote been supplied?
-
Is there a handle?
-
Which side is the rollover Sheet battened:
-
Load cell type correct
-
Next step:
-
Load cell bolts tight
-
Next step:
-
Add media
-
Is there a 3mm clearance in the Loadcell gap?
-
Next step:
-
Load cell indicators & alarms working
-
Next step:
-
Add media
Partition locking handle test
-
Partition locking handle
-
Next step:
-
Add media
Body up light test
-
Body up light
-
Next step:
-
Add media
Hose rack clearance test
-
Hose rack clearances
-
Next step:
-
Add media
Wire Watcher test
-
Wire watcher fitted & working
-
Next step:
-
Add media
-
Please provide photo:
Rubber Block test
-
Check rubber blocks
-
Next step:
-
Add media
Vehicle History (Rubber blocks)
-
Rubber block size:
Bolts test
-
dump valve bolts tight?
-
Next step:
-
Add media
-
Tip valve bolts tight?
-
Next step:
-
Add media
-
Engine mount bolts tight?
-
Next step:
-
Add media
-
Blower mount bolts tight?
-
Next step:
-
Add media
-
Trunking Bolts (All) tight?
-
Next step:
-
Add media
-
Rail bolts (All) tight?
-
Next step:
-
Add media
-
Hinge bracket bolts (M16) tight?
-
Next step:
-
Add media
-
Bottom tray bolts (M10 x 40) tight?
-
Next step:
-
Add media
-
Back air hose mikalors
-
Next step:
-
Add media
Body & Cab Clean assessment
-
body & cab clean
-
Next step:
-
Add media
Vehicle History (special items)
-
Please list ALL special items used:
-
Special Items:
Type Approval
Height Indicator
-
CRITERIA: Type / Position
-
STANDARD REF: NSSTA Applicable DIRECTIVE-REG-RECORD: EU 1230/2012
-
-
-
Please provide details:
-
Please provide details:
-
Add media
Vehicle Dimension (L)
-
CRITERIA: Type / Position
-
STANDARD REF: NSSTA Applicable DIRECTIVE-REG-RECORD: EU 1230/2012
-
-
-
Please provide details:
-
Please provide details:
-
Add media
Vehicle Dimension (W)
-
CRITERIA: Type / Position
-
STANDARD REF: NSSTA Applicable DIRECTIVE-REG-RECORD: EU 1230/2012
-
-
-
Please provide details:
Front Axle Weight
-
CRITERIA: VTA
-
STANDARD REF: NSSTA applicable DIRECTIVE-REG-RECORD: EU 1230/2012
-
-
-
Please provide details:
-
Please provide details:
-
Add media
2nd axle weight
-
CRITERIA: VTA
-
STANDARD REF: NSSTA applicable DIRECTIVE-REG-RECORD: EU 1230/2012
-
-
-
Please provide details:
-
Please provide details:
-
Add media
3rd axle weight
-
CRITERIA: VTA
-
STANDARD REF: NSSTA applicable DIRECTIVE-REG-RECORD: EU 1230/2012
-
-
-
Please provide details:
-
Please provide details:
-
Add media
4th axle weight
-
CRITERIA: VTA
-
STANDARD REF: NSSTA applicable DIRECTIVE-REG-RECORD: EU 1230/2012
-
-
-
Please provide details:
-
Please provide details:
-
Add media
Fuel Tank
-
CRITERIA: Type/position
-
STANDARD REF: ESN272303 DIRECTIVE-REG-RECORD: 34
-
-
-
Please provide details:
-
Please provide details:
-
Add media
5th Wheel Coupling
-
CRITERIA: Type/position
-
STANDARD REF: VSQ318471 DIRECTIVE-REG-RECORD: 55.01
-
-
-
Please provide details:
-
Please provide details:
-
Add media
Wings
-
CRITERIA: Type/position
-
STANDARD REF: VSQ321088 01 DIRECTIVE-REG-RECORD: 109/2011
-
-
-
Please provide details:
-
Please provide details:
-
Add media
Spray Suppression
-
CRITERIA: Type/position
-
STANDARD REF: VSQ321088 01 DIRECTIVE-REG-RECORD: 109/2011
-
-
-
Please provide details:
-
Please provide details:
-
Add media
Drawbar Mech Coupling
-
CRITERIA: Type/position
-
STANDARD REF: VSQ303162 DIRECTIVE-REG-RECORD: 55.01
-
-
-
Please provide details:
-
Please provide details:
-
Add media
Rear Number Plate Type
-
CRITERIA: Approved Type
-
STANDARD REF: VSQ303156 DIRECTIVE-REG-RECORD: 1003/2010
-
-
-
Please provide details:
-
Please provide details:
-
Add media
Rear Number Plate Position
-
CRITERIA: Position
-
STANDARD REF: VSQ303156 DIRECTIVE-REG-RECORD: 1003/2010
-
-
-
Please provide details:
-
Please provide details:
-
Add media
Lateral Protection
-
CRITERIA: Type/ Position
-
STANDARD REF: VSQ3031569 DIRECTIVE-REG-RECORD: 73.01
-
-
-
Please provide details:
-
Please provide details:
-
Add media
Rear Underun
-
CRITERIA: Type/ Position
-
STANDARD REF: VSQ303155 DIRECTIVE-REG-RECORD: 58.02
-
-
-
Please provide details:
-
Please provide details:
-
Add media
EMC Devices
-
CRITERIA: Approved Type
-
STANDARD REF: VSS360566 DIRECTIVE-REG-RECORD: 10
-
-
-
Please provide details:
-
Please provide details:
-
Add media
In Cab Control Functions
-
CRITERIA: Text/ Symbol/ Positioning/ Colour
-
STANDARD REF: ESP281600-33 DIRECTIVE-REG-RECORD: ECE Reg 121
-
-
-
Please provide details:
-
Please provide details:
-
Add media
Front Outline Marker
-
CRITERIA: Type/ Positioning
-
STANDARD REF: VSR337638 DIRECTIVE-REG-RECORD: 48
-
-
-
Please provide details:
-
Please provide details:
-
Add media
Side Markers
-
CRITERIA: Type/ Positioning
-
STANDARD REF: VSR337638 DIRECTIVE-REG-RECORD: 48
-
-
-
Please provide details:
-
Please provide details:
-
Add media
Rear Outline Markers
-
CRITERIA: Type/ Positioning
-
STANDARD REF: VSR337638 DIRECTIVE-REG-RECORD: 48
-
-
-
Please provide details:
-
Please provide details:
-
Add media
High Level Brake Light
-
CRITERIA: Type/ Positioning
-
STANDARD REF: VSR337638 DIRECTIVE-REG-RECORD: 48
-
-
-
Please provide details:
-
Please provide details:
-
Add media
Cluster- Indicators
-
CRITERIA: Type/ Positioning
-
STANDARD REF: VSR337638 DIRECTIVE-REG-RECORD: 48
-
-
-
Please provide details:
-
Please provide details:
-
Add media
Cluster- Brake Lights
-
CRITERIA: Type/ Positioning
-
STANDARD REF: VSR337638 DIRECTIVE-REG-RECORD: 48
-
-
-
Please provide details:
-
Please provide details:
-
Add media
Cluster- Fog Lights
-
CRITERIA: Type/ Positioning
-
STANDARD REF: VSR337638 DIRECTIVE-REG-RECORD: 48
-
-
-
Please provide details:
-
Please provide details:
-
Add media
Cluster- Stop Lights
-
CRITERIA: Type/ Positioning
-
STANDARD REF: VSR337638 DIRECTIVE-REG-RECORD: 48
-
-
-
Please provide details:
-
Please provide details:
-
Add media
Cluster- Rear Lights
-
CRITERIA: Type/ Positioning
-
STANDARD REF: VSR337638 DIRECTIVE-REG-RECORD: 48
-
-
-
Please provide details:
-
Please provide details:
-
Add media
Cluster- Reverse Light
-
CRITERIA: Type/ Positioning
-
STANDARD REF: VSR337638 DIRECTIVE-REG-RECORD: 48
-
-
-
Please provide details:
-
Please provide details:
-
Add media
Retro Reflector
-
CRITERIA: Type/ Positioning
-
STANDARD REF: VSR337638 DIRECTIVE-REG-RECORD: 48
-
-
-
Please provide details:
-
Please provide details:
-
Add media
End of Test
-
Test completion date:
-
Inspected by:
-
Follow ups required?
-
Please provide a photo of the completed service QC sheet
-
Service QC Sheet:
Follow Ups
-
Follow ups completed by:
-
Follow up completion date:
