Title Page
-
Site conducted
-
Job Number
-
Conducted on
-
Location
GENERAL
-
Builder's Sign on site and visible
-
Bin on site
-
Toilet is clean & tidy
-
Site Safety Management Plan check
TILING
-
Check tile selections are correct
-
Check that tiles are as per selections sheet
-
All surfaces to be tiles have been primes and sealed or water proofed (double water proofing over living areas)
-
Silicone all door (timer and sliding) tiled sills
-
Timber floors must be primed before tiling, joints taped & wastes cleared before screed
-
Excess screeding must not enter floor traps
-
Do not mix concrete screed on garage floors
-
All corners to have a consistently cleaned (no grout or glue) 3mm gap for siliconing junctions
-
Tiling floors shall not pond (1:60 in shower, 1:80 in other wet areas)
-
All external corners to use tile trim and check colour or mitre check selections sheet
-
If floor tiling large areas, control joints must confirm to BCA requirements
-
When tiling door or window sills, the render on the face must be 70mm down, straight and square
-
All floor tiling ends to have angles and finish at the inside edge of the door stop
-
Grout is to be mixed correctly, uniformed in colour, free of pinholes and voids (refer to document grouting made easy) tile booster must be used
-
Full tiling is to be applied behind the washing machine and laundry trough at 800mm wide
-
Spare tiles are to remain on site and stored in the pantry or under stairs
-
All wastes checked and cleared after finishing grouting
ACKNOWLEDGMENT
-
I have read and understood the requirements of this inspection as stated in Rivergum Homes Policies and Procedures
