VF463 - SMC Door Installation Checklist

• Bus number

• Site conducted

  Select

• Conducted on

  Date

• Prepared by

Chassis Section Checklist

• Check that the door aperture size is correct as per reference drawing. <br>Front Door: Height& Width<br>Centre Door: Height & Width

  Yes

  No

  N/A

• Front Door: Height & Width

• Centre Door: Height & Width

• Check that the door aperture is square.

  Yes

  No

  N/A

• Front Door:

• Rear Door:

• Check correct fasteners have been fitted. As per engineering drawing

  Yes

  No

  N/A

• Front Door

  Yes

  No

  N/A

• Rear Door

  Yes

  No

  N/A

• Check that the door mechanism plates are installed in correct position and are fastened securely. ( Centre of door aperture ) Reference to general arrangement drawing if required.

  Yes

  No

  N/A

• Front Door

  Yes

  No

  N/A

• Centre Door

  Yes

  No

  N/A

• Check door mechanism plates are mounted level.

  Yes

  No

  N/A

• Front Door

  Yes

  No

  N/A

• Rear Door

  Yes

  No

  N/A

Construction Section checklist for Inward Gliding Doors & Rapid sliding Door

• Check both door shafts are installed correctly.

  Yes

  No

  N/A

• Front Doors

  Yes

  No

  N/A

• Check that the both door shafts are parallel with the body and aperture.

  Yes

  No

  N/A

• Front Doors

  Yes

  No

  N/A

• Check both door leafs are installed correctly.

  Yes

  No

  N/A

• Front Doors

  Yes

  No

  N/A

• Are both door leafs parallel and does the lip on the nosing rubber on the front leaf lie on the outside of the rear leaf. Check the clearance between the aperture side and the door leafs. Check that the door leafs are square in the aperture. If not adjust the doors. See VENTURA door installation guide.

  Yes

  No

  N/A

• Front Doors

  Yes

  No

  N/A

• Check that the door leafs are installed correctly. Is the outside of door leafs up against the aperture seal when doors are closed.

  Yes

  No

  N/A

• Front Doors

  Yes

  No

  N/A

• Check that the top of the door leafs on outside of bus are in line with the profile of the bus. If not adjusted. See VENTURA door installation guide.

  Yes

  No

  N/A

• Front Doors

  Yes

  No

  N/A

• Check aperture seal if fitted correctly.

  Yes

  No

  N/A

• Front Doors

  Yes

  No

  N/A

• Are the sensitive edge wires in a non-strained and free of pinching when the doors are opened & closed.

  Yes

  No

  N/A

• Front Doors

  Yes

  No

  N/A

• Check power supply. Check door leafs are moving smoothly open / closed. Check for any obstructions (loose parts, wiring or tubes) Check guiding brackets run smoothly through the guiding rail. Check door leafs are perpendicular with step edge. Check the pneumatic system (if applicable) for leakage during opening & closing.

  Yes

  No

  N/A

• Front Doors

  Yes

  No

  N/A

• Check all torque settings have been completed. See VENTURA door installation guide.

  Yes

  No

  N/A

• Front Doors

  Yes

  No

  N/A

• Check the door shaft is mounted correctly. See VENTURA door installation guide.

  Yes

  No

  N/A

• Centre Door

  Yes

  No

  N/A

• Check the upper door arm is mounted correctly. See VENTURA door installation guide.

  Yes

  No

  N/A

• Centre Door

  Yes

  No

  N/A

• Check door leaf is mounted correctly. See VENTURA door installation guide.

  Yes

  No

  N/A

• Centre Door

  Yes

  No

  N/A

• Check door leaf is parallel with step edge. See VENTURA door installation guide.

  Yes

  No

  N/A

• Centre Door

  Yes

  No

  N/A

• Check door leaf is level and height is set correctly in aperture. See VENTURA door installation guide.

  Yes

  No

  N/A

• Centre Door

  Yes

  No

  N/A

• Check door leaf in closed position is flush with outside surface of aperture. See VENTURA door installation guide.

  Yes

  No

  N/A

• Centre Door

  Yes

  No

  N/A

• Check door leaf aperture seal in fully closed position is flush with outside surface of the aperture. See VENTURA door installation guide.

  Yes

  No

  N/A

• Centre Door

  Yes

  No

  N/A

• Check door leaf is moving smoothly through open & closed position.

  Yes

  No

  N/A

• Centre Door

  Yes

  No

  N/A

• Check there are no obstructions ( ex: loose parts, wires or tubes )

  Yes

  No

  N/A

• Centre Door

  Yes

  No

  N/A

• Check the seal between door leaf, the aperture and the floor is sufficient.

  Yes

  No

  N/A

• Centre Door

  Yes

  No

  N/A

• Check the pneumatic system (if applicable) for leakage during opening & closing.

  Yes

  No

  N/A

• Rear Door

  Yes

  No

  N/A

• Check the emergency buttons operate.

  Yes

  No

  N/A

• Rear Door

  Yes

  No

  N/A

• Check all torque settings have been completed. See VENTURA door installation guide.

  Yes

  No

  N/A

• Rear Door

  Yes

  No

  N/A