Title Page
-
Conducted on
-
Prepared by
-
Location
Cleaning Checklist
-
(Daily) Remove all the bottles from the line – unused bottles to be covered. Used bottles to be discarded.
-
(Daily) Clean all machinery with TAKEOFF & PURESAN.
-
(Daily) Rinse the floor and machinery with water. Squeegee the water to remove any stagnant water. Air dry the machines.
-
(Daily) Empty ALL the grey waste bins at the END of the day.
-
(Daily) Check if the floor is clean before leaving - Nothing should be on the floor except grey bins, black chemical bins & plastic pallets
-
(Daily) Check all drains and remove any foreign matters in the drain sieves on the floor - once cleared, ALWAYS put the drains back
-
(Daily) Dry clean the control panels using the isowipes
-
(Daily) Check the stock level of the chemicals. Ask QA/PM for orders
-
(Weekly) Foam (+Scrub) + Sanitise the entire room including equipment, floors, walls, windows, stairs, handrails, handles and doors using Takeoff & Puresan: End of the Week
-
(Weekly) After rinsing, squeegee all the water (on floor & window) to speed up the drying process: End of the Week
-
(Weekly) Clean the foot baths and floor & sinks in the changing area.
-
Write down who has completed the cleaning for the day.
-
Any other comments?
-
Have Waste bins on the floor been cleaned and emptied?
-
Has all the equipment been turned off and cleaned up to appropriate standards?
-
Have all tools & chemicals been properly stored in their designated areas?
-
Hoses off? Nozzles off the floor?
-
Are all areas clean and tidy including the floor and trolleys? No stagnant water?
-
Free from any insects (e.g., fruit flies, midges, mosquitos, flies)?
-
If there are any, spray the insecticides and rinse off with water. Make sure there are no ingredients & products. If you need to spray those areas, you need to take those out and bring them back once rinsed.
-
Used PPEs placed in laundry bin?
-
Have all the forms been completed?