Field Dimensioning Checklist

• Checklist No.

• Field Dimension Checklist

• Measured on

  Date

• Prepared by

• Location checklist was prepared at
  Address

• ISEC personnel involved with dimensions noted on this list

Preplanning Items (should be addressed prior to leaving the office for field dimensions)

• When does the contract schedule state that ISEC is installing the materials being dimensioned?

  Date

• Is this project AWI Certified? If yes, does this include installation?

  Select Yes, but not installation Yes, including installation No

  • Yes, but not installation
  • Yes, including installation
  • No

• What materials are being measured today?

  Select PL/Wood Casework Stainless/Metal Casework PL/Wood Wall Paneling Phenolic Wall Paneling Formed Stainless/Metal Wall Paneling PL Countertops Quartz Countertops Solid Surface (Corian) Countertops Stainless Steel Countertops Epoxy Resin Countertops

  • PL/Wood Casework
  • Stainless/Metal Casework
  • PL/Wood Wall Paneling
  • Phenolic Wall Paneling
  • Formed Stainless/Metal Wall Paneling
  • PL Countertops
  • Quartz Countertops
  • Solid Surface (Corian) Countertops
  • Stainless Steel Countertops
  • Epoxy Resin Countertops

• Tools/measuring devices required to properly dimension area

  Select 35' tape measure 100' laser measurer 5 point (crosshair) laser Laser level Construction calculator/application Framing square Angle finder Extra batteries for lasers, and/or flashlight Folding 3,4=5 square Camera (phone/iPad) Phone/iPad charger All drawings (contract, vendor, and/or ISEC shops) Chalk line w/chalk Magnets/stud finder Rubbermaid cart Clipboard Ladder, scaffold or scissor lift Masking tape (blue or white) Pencils, pens, sharpies and stylus' Laser templating device (LT2D3D) Lighting (task, headlamp or flashlight) Spacer blocks (5/8"=drywall on framing, etc.) Templating materials (butcher paper, Masonite, etc.)

  • 35' tape measure
  • 100' laser measurer
  • 5 point (crosshair) laser
  • Laser level
  • Construction calculator/application
  • Framing square
  • Angle finder
  • Extra batteries for lasers, and/or flashlight
  • Folding 3,4=5 square
  • Camera (phone/iPad)
  • Phone/iPad charger
  • All drawings (contract, vendor, and/or ISEC shops)
  • Chalk line w/chalk
  • Magnets/stud finder
  • Rubbermaid cart
  • Clipboard
  • Ladder, scaffold or scissor lift
  • Masking tape (blue or white)
  • Pencils, pens, sharpies and stylus'
  • Laser templating device (LT2D3D)
  • Lighting (task, headlamp or flashlight)
  • Spacer blocks (5/8"=drywall on framing, etc.)
  • Templating materials (butcher paper, Masonite, etc.)