Title Page
-
Site conducted
-
Conducted on
-
Prepared by
-
Hoist Type
-
Make & Model
Checklists
Item requiring inspection
-
Hoist User& Maintenance Manual is available
-
Trained User Register (Retained with User Manual)
-
Authorized Hoist Operators List is displayed
-
Safe Working Load is displayed (“Working Load Limit … kg”)
-
Manufacturer’s plaque (with manufacture date) affixed to hoist
-
Manufacturer’s plaque states applicable compliance standard e.g., AS 2550
-
Operating instructions are displayed
-
Any required cautions are displayed, per Australian Standards.
-
Moving parts of hoist and its load have a minimum 600mm clearance to any fixed structure or other moving equipment.
-
Hoist Safe Operation Area is clearly marked on floor
-
Electrical Isolation Switch (labelled & lockable)
-
Safety Mechanism(s) fitted and working correctly e.g., lock on 2-post swing arms
-
Vehicle hoist- 600mm (minimum) clearance between moving parts of hoist and any fixed structure or any other moving equipment.
-
Dropped bar (safety prop) fitted to in-ground hydraulic ram type hoist which prevents hoist lowering to less than 760mm.
-
Pre-operation safety checklist is displayed
-
Monthly Operation Checklist is displayed
-
Maintenance records maintained and confirmed that 10 yearly major assessment is not over-due (if second-hand hoist)
-
I acknowledge that I have confirmed all items above and that this hoist meets the minimum Toyota Training Centre Standards.