AKL END OF THE DAY/CLEANING CHECK (Batch makers)

Location

(Daily) Clean & Sanitise the tools (e.g. buckets, bins, scoops), benches and sink using Takeoff & Everswift IPA

(Daily) Rinse the platform with water

(Daily) Empty ALL the grey waste bins at the END of the day on the platform.

(Daily) Check if the floor is clean before leaving - Nothing should be on the floor except grey bins, black chemical bins & plastic pallets

(Daily) Clean the benches and fume hood in the Lab

(Daily) Check all drains and remove any foreign matters in the drain sieves on the platform - once cleared, ALWAYS put the drains back

(Daily) Dry clean the control panels using the isowipes

(Daily) After rinsing, squeegee all the water (on floor, working benches & window) to speed up the drying process

(Daily) Check if there is any dirty plastic pallets in the Inwards area and clean them

(Weekly) Foam (+Scrub) + Sanitise the entire room including equipment, floors (including lab), walls, windows, stairs, handrails, handles and doors using Takeoff & Puresan: End of the Week

(Weekly) After rinsing, squeegee all the water (on floor & window) to speed up the drying process: End of the Week

(Weekly) Clean the changing area cubicles including the gumboots.

Have Waste bins on the platform been cleaned and emptied?

Have all tools & chemicals been properly stored in their designated areas?

All ingredients returned or discarded? All areas must be free from any leftover ingredients before you leave.

Hoses off? Nozzles off the floor?

Are all areas clean and tidy including the floor and working bench? No stagnant water?

Free from any insects (e.g., fruit flies, midges, mosquitos, flies)?

Used PPEs placed in laundry bin?

Have all the forms been completed?