Title Page

  • Conducted on

  • Prepared by

  • Location
  • Has a risk assessment and method statement been prepared

  • Is the area prepared for this element

  • Has a sample room been completed and approved

  • Check that services have been completed above ceiling level

  • Ensure good lighting is provided and maintained

  • Provide radiator positions for additional wall fixing supports. Ditto for any heavy wall fixed items

  • Determine side 1 to all partition walls

  • Check wall alignment and plumb

  • Check centres of fixings to the structure and method of fixing

  • Check vertical stud spacing's

  • Check door opening dimensions, heights and widths

  • Check the partition for stability at various locations

  • Check that all vertical studs face the same direction

  • Check that timber surrounds are solidly fitted to all door openings

  • Check that any cut plaster board is uniformly fitted and edges supported

  • Check that services fitted to side 1 are securely fitted and that they do not foul side 2

  • Check that all electrical back boxes are fixed to plywood pattresses

  • Check sequence and quality of AMES taping to plaster board joints

  • Check the finished surface of sides 1 and 2 for quality of finish

  • Have work areas been left clean and tidy

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.