Title Page
-
Conducted on
-
Prepared by
-
Location
-
Are you signed in at the store?
-
Have you been inducted on where fire exits and assembly points are?
-
Check for correct operating temperature
-
Check for any repeating high temperature alarms multicast history and investigate as necessary
-
Check for correct probe readings
-
Check operation of evaporator fans
-
Replace as necessary
-
Yes replaced fan motor
-
No not required
-
Ensure fan mounting, fan blades and panels are secure
-
Leak test carried out
-
Evaporator coil
-
TEV connections
-
Service access points
-
Solenoid valve
-
Isolation valves
-
Interconnecting pipework
-
Flush and check condensate drain for leaks
-
Repair as necessary
-
Test drain line heaters
-
Check defrost heaters
-
Clean evaporator, drain pan and fan guards
-
Check door gasket for damage
-
Check operation of door trim heaters, under floor heater mat and threshold heaters
-
Check lighting including emergency lights
-
Test operation of entrapment system
-
Test operation of door switches
-
Replace any damaged pipe insulation where necessary
-
Test operation of expansion valve
-
Check installation of phial position
-
Carry out manual forced defrost
-
Check that termination temperature is correct
-
Check operation of all controls
-
Check PVC curtains and if any are missing generate a quote for replacement
-
Quote required
-
Yes
-
No
-
Store: Signature agreeing the above requirements are completed
